ES Series Bell Float Steam Traps

MFP14 Single Pump Combination Device

The MEP14 (single pump, double pump, triple pump) combination device is to install the MEP14 automatic pump, open water storage tank and other necessary accessories together in a rigid frame. Steam, compressed air or other gas is used as the power medium to recover condensed water. In order not to affect the normal operation of the front-end steam trap device, the combined pump device is designed to be open, and the water storage tank is not pressurized, so that the back pressure of the front-end steam trap valve is as low as possible under any working condition, so as to avoid the phenomenon of steam trap valve stagnation, and ensure the normal operation of the front-end process.

LTS Type Integrated Universal Connector

Features

LTS universal connector – combines inlet and outlet isolation valves and filters in one unit and is suitable for various types of steam traps.

Eliminate potential leak points.

With filter drain valve.

Equipped with test port to facilitate checking the working status of the steam trap.

Made of stainless steel, durable.

One-piece design provides accurate structural length and greatly reduces design time.

Universal connector steam trap station can match the pipeline in any direction.

CA44/CA46 Series Float Air Traps

Horizontal installation, maximum pressure difference 32bar, maximum displacement up to 2800Kg/h.

 

Features

It is a continuous drainage method with excellent drainage capacity.

The structure is simple, and the internal parts are all installed on the valve cover, so they can be repaired without removing them from the pipe.

With 1/2″ female balancing port.

SC Series Replaceable Valve Seat Thermodynamic Steam Traps

Horizontal installation, maximum pressure difference 21bar, maximum displacement up to 1500Kg/h.

 

Features

The valve seat drainage holes are set to three holes evenly distributed, the action is stable, the valve seat wear is less, and the heat insulation cover reduces the empty striking phenomenon.

Online replacement valve seat module, easy maintenance.

CA14 Series Float Type Air Trap

Horizontal installation, maximum pressure difference 14bar, maximum displacement up to 700Kg/h.

 

Features

It is a continuous drainage method with excellent drainage capacity.

The structure is simple, and the internal parts are all installed on the valve cover, so they can be repaired without removing them from the pipe.

With 3/8″ internal thread balance port.